AI Avatar Download

AI Avatar Download — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Flat-field correction

  Flat-field correction (FFC) is a digital imaging technique to mitigate pixel-to-pixel differences in the photodetector sensitivity and distortions in the optical path. It is a standard calibration procedure in everything from personal digital cameras to large telescopes. == Overview == Flat fielding refers to the process of compensating for different gains and dark currents in a detector. Once a detector has been appropriately flat-fielded, a uniform signal will create a uniform output (hence flat-field). This then means any further signal is due to the phenomenon being detected and not a systematic error. A flat-field image is acquired by imaging a uniformly-illuminated screen, thus producing an image of uniform color and brightness across the frame. For handheld cameras, the screen could be a piece of paper at arm's length, but a telescope will frequently image a clear patch of sky at twilight, when the illumination is uniform and there are few, if any, stars visible. Once the images are acquired, processing can begin. A flat-field consists of two numbers for each pixel, the pixel's gain and its dark current (or dark frame). The pixel's gain is how the amount of signal given by the detector varies as a function of the amount of light (or equivalent). The gain is almost always a linear variable, as such the gain is given simply as the ratio of the input and output signals. The dark-current is the amount of signal given out by the detector when there is no incident light (hence dark frame). In many detectors this can also be a function of time, for example in astronomical telescopes it is common to take a dark-frame of the same time as the planned light exposure. The gain and dark-frame for optical systems can also be established by using a series of neutral density filters to give input/output signal information and applying a least squares fit to obtain the values for the dark current and gain. C = ( R − D ) × m ( F − D ) = ( R − D ) × G {\displaystyle C={\frac {(R-D)\times m}{(F-D)}}=(R-D)\times G} where: C = corrected image R = raw image F = flat field image D = dark frame image m = image-averaged value of (F−D) G = Gain = m ( F − D ) {\displaystyle m \over (F-D)} In this equation, capital letters are 2D matrices, and lowercase letters are scalars. All matrix operations are performed element-by-element. In order for an astrophotographer to capture a light frame, they must place a light source over the imaging instrument's objective lens such that the light source emanates evenly through the users optics. The photographer must then adjust the exposure of their imaging device (charge-coupled device (CCD) or digital single-lens reflex camera (DSLR) ) so that when the histogram of the image is viewed, a peak reaching about 40–70% of the dynamic range (maximum range of pixel values) of the imaging device is seen. The photographer typically takes 15–20 light frames and performs median stacking. Once the desired light frames are acquired, the objective lens is covered so that no light is allowed in, then 15–20 dark frames are taken, each of equal exposure time as a light frame. These are called Dark-Flat frames. == In X-ray imaging == In X-ray imaging, the acquired projection images generally suffer from fixed-pattern noise, which is one of the limiting factors of image quality. It may stem from beam inhomogeneity, gain variations of the detector response due to inhomogeneities in the photon conversion yield, losses in charge transport, charge trapping, or variations in the performance of the readout. Also, the scintillator screen may accumulate dust and/or scratches on its surface, resulting in systematic patterns in every acquired X-ray projection image. In X-ray computed tomography (CT), fixed-pattern noise is known to significantly degrade the achievable spatial resolution and generally leads to ring or band artifacts in the reconstructed images. Fixed pattern noise can be easily removed using flat field correction. In conventional flat field correction, projection images without sample are acquired with and without the X-ray beam turned on, which are referred to as flat fields (F) and dark fields (D). Based on the acquired flat and dark fields, the measured projection images (P) with sample are then normalized to new images (N) according to: N = ( P − D ) ( F − D ) {\displaystyle N={\frac {(P-D)}{(F-D)}}} == Dynamic flat field correction == While conventional flat field correction is an elegant and easy procedure that largely reduces fixed-pattern noise, it heavily relies on the stationarity of the X-ray beam, scintillator response and CCD sensitivity. In practice, however, this assumption is only approximately met. Indeed, detector elements are characterized by intensity dependent, nonlinear response functions and the incident beam often shows time dependent non-uniformities, which render conventional FFC inadequate. In synchrotron X-ray tomography, many factors may cause flat field variations: instability of the bending magnets of the synchrotron, temperature variations due to the water cooling in mirrors and the monochromator, or vibrations of the scintillator and other beamline components. The latter is responsible for the biggest variations in the flat fields. To deal with such variations, a dynamic flat field correction procedure can be employed that estimates a flat field for each individual projection. Through principal component analysis of a set of flat fields, which are acquired prior and/or posterior to the actual scan, eigen flat fields can be computed. A linear combination of the most important eigen flat fields can then be used to individually normalize each X-ray projection: N j = P j − D ¯ F ¯ + ∑ k w j k u k − D ¯ {\displaystyle N_{j}={\frac {P_{j}-{\bar {D}}}{{\bar {F}}+\sum _{k}w_{jk}u_{k}-{\bar {D}}}}} where N j {\displaystyle N_{j}} = intensity normalized X-ray projection P j {\displaystyle P_{j}} = raw X-ray projection F ¯ {\displaystyle {\bar {F}}} = mean flat field image (average of flat fields) u k {\displaystyle u_{k}} = k-th eigen flat field w j k {\displaystyle w_{jk}} = weight of the eigen flat field u k {\displaystyle u_{k}} D ¯ {\displaystyle {\bar {D}}} = mean dark field (average of dark fields)

  Read more →
• 

  Pooling layer

  In neural networks, a pooling layer is a kind of network layer that downsamples and aggregates information that is dispersed among many vectors into fewer vectors. It has several uses. It removes redundant information, thus reducing the amount of computation and memory required, which makes the model more robust to small variations in the input; and it increases the receptive field of neurons in later layers in the network. == Convolutional neural network pooling == Pooling is most commonly used in convolutional neural networks (CNN). Below is a description of pooling in 2-dimensional CNNs. The generalization to n-dimensions is immediate. As notation, we consider a tensor x ∈ R H × W × C {\displaystyle x\in \mathbb {R} ^{H\times W\times C}} , where H {\displaystyle H} is height, W {\displaystyle W} is width, and C {\displaystyle C} is the number of channels. A pooling layer outputs a tensor y ∈ R H ′ × W ′ × C ′ {\displaystyle y\in \mathbb {R} ^{H'\times W'\times C'}} . We define two variables f , s {\displaystyle f,s} called "filter size" (aka "kernel size") and "stride". Sometimes, it is necessary to use a different filter size and stride for horizontal and vertical directions. In such cases, we define 4 variables: f H , f W , s H , s W {\displaystyle f_{H},f_{W},s_{H},s_{W}} . The receptive field of an entry in the output tensor, y {\displaystyle y} , are all the entries in x {\displaystyle x} that can affect that entry. === Max pooling === Max Pooling (MaxPool) is commonly used in CNNs to reduce the spatial dimensions of feature maps. Define M a x P o o l ( x | f , s ) 0 , 0 , 0 = max ( x 0 : f − 1 , 0 : f − 1 , 0 ) {\displaystyle \mathrm {MaxPool} (x|f,s)_{0,0,0}=\max(x_{0:f-1,0:f-1,0})} where 0 : f − 1 {\displaystyle 0:f-1} means the range 0 , 1 , … , f − 1 {\displaystyle 0,1,\dots ,f-1} . Note that we need to avoid the off-by-one error. The next input is M a x P o o l ( x | f , s ) 1 , 0 , 0 = max ( x s : s + f − 1 , 0 : f − 1 , 0 ) {\displaystyle \mathrm {MaxPool} (x|f,s)_{1,0,0}=\max(x_{s:s+f-1,0:f-1,0})} and so on. The receptive field of y i , j , c {\displaystyle y_{i,j,c}} is x i s + f − 1 , j s + f − 1 , c {\displaystyle x_{is+f-1,js+f-1,c}} , so in general, M a x P o o l ( x | f , s ) i , j , c = m a x ( x i s : i s + f − 1 , j s : j s + f − 1 , c ) {\displaystyle \mathrm {MaxPool} (x|f,s)_{i,j,c}=\mathrm {max} (x_{is:is+f-1,js:js+f-1,c})} If the horizontal and vertical filter size and strides differ, then in general, M a x P o o l ( x | f , s ) i , j , c = m a x ( x i s H : i s H + f H − 1 , j s W : j s W + f W − 1 , c ) {\displaystyle \mathrm {MaxPool} (x|f,s)_{i,j,c}=\mathrm {max} (x_{is_{H}:is_{H}+f_{H}-1,js_{W}:js_{W}+f_{W}-1,c})} More succinctly, we can write y k = max ( { x k ′ | k ′ in the receptive field of k } ) {\displaystyle y_{k}=\max(\{x_{k'}|k'{\text{ in the receptive field of }}k\})} . If H {\displaystyle H} is not expressible as k s + f {\displaystyle ks+f} where k {\displaystyle k} is an integer, then for computing the entries of the output tensor on the boundaries, max pooling would attempt to take as inputs variables off the tensor. In this case, how those non-existent variables are handled depends on the padding conditions, illustrated on the right. Global Max Pooling (GMP) is a specific kind of max pooling where the output tensor has shape R C {\displaystyle \mathbb {R} ^{C}} and the receptive field of y c {\displaystyle y_{c}} is all of x 0 : H , 0 : W , c {\displaystyle x_{0:H,0:W,c}} . That is, it takes the maximum over each entire channel. It is often used just before the final fully connected layers in a CNN classification head. === Average pooling === Average pooling (AvgPool) is similarly defined A v g P o o l ( x | f , s ) i , j , c = a v e r a g e ( x i s : i s + f − 1 , j s : j s + f − 1 , c ) = 1 f 2 ∑ k ∈ i s : i s + f − 1 ∑ l ∈ j s : j s + f − 1 x k , l , c {\displaystyle \mathrm {AvgPool} (x|f,s)_{i,j,c}=\mathrm {average} (x_{is:is+f-1,js:js+f-1,c})={\frac {1}{f^{2}}}\sum _{k\in is:is+f-1}\sum _{l\in js:js+f-1}x_{k,l,c}} Global Average Pooling (GAP) is defined similarly to GMP. It was first proposed in Network-in-Network. Similarly to GMP, it is often used just before the final fully connected layers in a CNN classification head. === Interpolations === There are some interpolations of max pooling and average pooling. Mixed Pooling is a linear sum of max pooling and average pooling. That is, M i x e d P o o l ( x | f , s , w ) = w M a x P o o l ( x | f , s ) + ( 1 − w ) A v g P o o l ( x | f , s ) {\displaystyle \mathrm {MixedPool} (x|f,s,w)=w\mathrm {MaxPool} (x|f,s)+(1-w)\mathrm {AvgPool} (x|f,s)} where w ∈ [ 0 , 1 ] {\displaystyle w\in [0,1]} is either a hyperparameter, a learnable parameter, or randomly sampled anew every time. Lp Pooling is similar to average pooling, but uses Lp norm average instead of average: y k = ( 1 N ∑ k ′ in the receptive field of k | x k ′ | p ) 1 / p {\displaystyle y_{k}=\left({\frac {1}{N}}\sum _{k'{\text{ in the receptive field of }}k}|x_{k'}|^{p}\right)^{1/p}} where N {\displaystyle N} is the size of receptive field, and p ≥ 1 {\displaystyle p\geq 1} is a hyperparameter. If all activations are non-negative, then average pooling is the case of p = 1 {\displaystyle p=1} , and max pooling is the case of p → ∞ {\displaystyle p\to \infty } . Square-root pooling is the case of p = 2 {\displaystyle p=2} . Stochastic pooling samples a random activation x k ′ {\displaystyle x_{k'}} from the receptive field with probability x k ′ ∑ k ″ x k ″ {\displaystyle {\frac {x_{k'}}{\sum _{k''}x_{k''}}}} . It is the same as average pooling in expectation. Softmax pooling is like max pooling, but uses softmax, i.e. ∑ k ′ e β x k ′ x k ′ ∑ k ″ e β x k ″ {\displaystyle {\frac {\sum _{k'}e^{\beta x_{k'}}x_{k'}}{\sum _{k''}e^{\beta x_{k''}}}}} where β > 0 {\displaystyle \beta >0} . Average pooling is the case of β ↓ 0 {\displaystyle \beta \downarrow 0} , and max pooling is the case of β ↑ ∞ {\displaystyle \beta \uparrow \infty } Local Importance-based Pooling generalizes softmax pooling by ∑ k ′ e g ( x k ′ ) x k ′ ∑ k ″ e g ( x k ″ ) {\displaystyle {\frac {\sum _{k'}e^{g(x_{k'})}x_{k'}}{\sum _{k''}e^{g(x_{k''})}}}} where g {\displaystyle g} is a learnable function. === Other poolings === Spatial pyramidal pooling applies max pooling (or any other form of pooling) in a pyramid structure. That is, it applies global max pooling, then applies max pooling to the image divided into 4 equal parts, then 16, etc. The results are then concatenated. It is a hierarchical form of global pooling, and similar to global pooling, it is often used just before a classification head. Region of Interest Pooling (also known as RoI pooling) is a variant of max pooling used in R-CNNs for object detection. It is designed to take an arbitrarily-sized input matrix, and output a fixed-sized output matrix. Covariance pooling computes the covariance matrix of the vectors { x k , l , 0 : C − 1 } k ∈ i s : i s + f − 1 , l ∈ j s : j s + f − 1 {\displaystyle \{x_{k,l,0:C-1}\}_{k\in is:is+f-1,l\in js:js+f-1}} which is then flattened to a C 2 {\displaystyle C^{2}} -dimensional vector y i , j , 0 : C 2 − 1 {\displaystyle y_{i,j,0:C^{2}-1}} . Global covariance pooling is used similarly to global max pooling. As average pooling computes the average, which is a first-degree statistic, and covariance is a second-degree statistic, covariance pooling is also called "second-order pooling". It can be generalized to higher-order poolings. Blur Pooling means applying a blurring method before downsampling. For example, the Rect-2 blur pooling means taking an average pooling at f = 2 , s = 1 {\displaystyle f=2,s=1} , then taking every second pixel (identity with s = 2 {\displaystyle s=2} ). == Vision Transformer pooling == In Vision Transformers (ViT), there are the following common kinds of poolings. BERT-like pooling uses a dummy [CLS] token, "classification". For classification, the output at [CLS] is the classification token, which is then processed by a LayerNorm-feedforward-softmax module into a probability distribution, which is the network's prediction of class probability distribution. This is the one used by the original ViT and Masked Autoencoder. Global average pooling (GAP) does not use the dummy token, but simply takes the average of all output tokens as the classification token. It was mentioned in the original ViT as being equally good. Multihead attention pooling (MAP) applies a multi headed attention block to pooling. Specifically, it takes as input a list of vectors x 1 , x 2 , … , x n {\displaystyle x_{1},x_{2},\dots ,x_{n}} , which might be thought of as the output vectors of a layer of a ViT. It then applies a feedforward layer F F N {\displaystyle \mathrm {FFN} } on each vector, resulting in a matrix V = [ F F N ( v 1 ) , … , F F N ( v n ) ] {\displaystyle V=[\mathrm {FFN} (v_{1}),\dots ,\mathrm {FFN} (v_{n})]} . This is then sent to a multi-headed attention, resulting in M u l t i h e a d e d A

  Read more →
• 

  Chinchilla (language model)

  Chinchilla is a family of large language models (LLMs) developed by the research team at Google DeepMind, presented in March 2022. == Models == It is named "chinchilla" because it is a further development over a previous model family named Gopher. Both model families were trained in order to investigate the scaling laws of large language models. It claimed to outperform GPT-3. It considerably simplifies downstream utilization because it requires much less computer power for inference and fine-tuning. Based on the training of previously employed language models, it has been determined that if one doubles the model size, one must also have twice the number of training tokens. This hypothesis has been used to train Chinchilla by DeepMind. Similar to Gopher in terms of cost, Chinchilla has 70B parameters and four times as much data. Chinchilla has an average accuracy of 67.5% on the Measuring Massive Multitask Language Understanding (MMLU) benchmark, which is 7% higher than Gopher's performance. Chinchilla was still in the testing phase as of January 12, 2023. Chinchilla contributes to developing an effective training paradigm for large autoregressive language models with limited compute resources. The Chinchilla team recommends that the number of training tokens is twice for every model size doubling, meaning that using larger, higher-quality training datasets can lead to better results on downstream tasks. It has been used for the Flamingo vision-language model. == Architecture == Both the Gopher family and Chinchilla family are families of transformer models. In particular, they are essentially the same as GPT-2, with different sizes and minor modifications. Gopher family uses RMSNorm instead of LayerNorm; relative positional encoding rather than absolute positional encoding. The Chinchilla family is the same as the Gopher family, but trained with AdamW instead of Adam optimizer. The Gopher family contains six models of increasing size, from 44 million parameters to 280 billion parameters. They refer to the largest one as "Gopher" by default. Similar naming conventions apply for the Chinchilla family. Table 1 of shows the entire Gopher family: Table 4 of compares the 70-billion-parameter Chinchilla with Gopher 280B.

  Read more →
• 

  Neural radiance field

  A neural radiance field (NeRF) is a neural field for reconstructing a three-dimensional representation of a scene from two-dimensional images. The NeRF model enables downstream applications of novel view synthesis, scene geometry reconstruction, and obtaining the reflectance properties of the scene. Additional scene properties such as camera poses may also be jointly learned. First introduced in 2020, it has since gained significant attention for its potential applications in computer graphics and content creation. == Algorithm == The NeRF algorithm represents a scene as a radiance field parametrized by a deep neural network (DNN). The network predicts a volume density and view-dependent emitted radiance given the spatial location ( x , y , z ) {\displaystyle (x,y,z)} and viewing direction in Euler angles ( θ , Φ ) {\displaystyle (\theta ,\Phi )} of the camera. By sampling many points along camera rays, traditional volume rendering techniques can produce an image. === Data collection === A NeRF needs to be retrained for each unique scene. The first step is to collect images of the scene from different angles and their respective camera pose. These images are standard 2D images and do not require a specialized camera or software. Any camera is able to generate datasets, provided the settings and capture method meet the requirements for SfM (Structure from Motion). This requires tracking of the camera position and orientation, often through some combination of SLAM, GPS, or inertial estimation. Researchers often use synthetic data to evaluate NeRF and related techniques. For such data, images (rendered through traditional non-learned methods) and respective camera poses are reproducible and error-free. === Training === For each sparse viewpoint (image and camera pose) provided, camera rays are marched through the scene, generating a set of 3D points with a given radiance direction (into the camera). For these points, volume density and emitted radiance are predicted using the multi-layer perceptron (MLP). An image is then generated through classical volume rendering. Because this process is fully differentiable, the error between the predicted image and the original image can be minimized with gradient descent over multiple viewpoints, encouraging the MLP to develop a coherent model of the scene. == Variations and improvements == Early versions of NeRF were slow to optimize and required that all input views were taken with the same camera in the same lighting conditions. These performed best when limited to orbiting around individual objects, such as a drum set, plants or small toys. Since the original paper in 2020, many improvements have been made to the NeRF algorithm, with variations for special use cases. === Fourier feature mapping === In 2020, shortly after the release of NeRF, the addition of Fourier Feature Mapping improved training speed and image accuracy. Deep neural networks struggle to learn high frequency functions in low dimensional domains; a phenomenon known as spectral bias. To overcome this shortcoming, points are mapped to a higher dimensional feature space before being fed into the MLP. γ ( v ) = [ a 1 cos ⁡ ( 2 π B 1 T v ) a 1 sin ⁡ ( 2 π B 1 T v ) ⋮ a m cos ⁡ ( 2 π B m T v ) a m sin ⁡ ( 2 π B m T v ) ] {\displaystyle \gamma (\mathrm {v} )={\begin{bmatrix}a_{1}\cos(2{\pi }{\mathrm {B} }_{1}^{T}\mathrm {v} )\\a_{1}\sin(2\pi {\mathrm {B} }_{1}^{T}\mathrm {v} )\\\vdots \\a_{m}\cos(2{\pi }{\mathrm {B} }_{m}^{T}\mathrm {v} )\\a_{m}\sin(2{\pi }{\mathrm {B} }_{m}^{T}\mathrm {v} )\end{bmatrix}}} Where v {\displaystyle \mathrm {v} } is the input point, B i {\displaystyle \mathrm {B} _{i}} are the frequency vectors, and a i {\displaystyle a_{i}} are coefficients. This allows for rapid convergence to high frequency functions, such as pixels in a detailed image. === Bundle-adjusting neural radiance fields === One limitation of NeRFs is the requirement of knowing accurate camera poses to train the model. Often times, pose estimation methods are not completely accurate, nor is the camera pose even possible to know. These imperfections result in artifacts and suboptimal convergence. So, a method was developed to optimize the camera pose along with the volumetric function itself. Called Bundle-Adjusting Neural Radiance Field (BARF), the technique uses a dynamic low-pass filter (DLPF) to go from coarse to fine adjustment, minimizing error by finding the geometric transformation to the desired image. This corrects imperfect camera poses and greatly improves the quality of NeRF renders. === Multiscale representation === Conventional NeRFs struggle to represent detail at all viewing distances, producing blurry images up close and overly aliased images from distant views. In 2021, researchers introduced a technique to improve the sharpness of details at different viewing scales known as mip-NeRF (comes from mipmap). Rather than sampling a single ray per pixel, the technique fits a gaussian to the conical frustum cast by the camera. This improvement effectively anti-aliases across all viewing scales. mip-NeRF also reduces overall image error and is faster to converge at about half the size of ray-based NeRF. === Learned initializations === In 2021, researchers applied meta-learning to assign initial weights to the MLP. This rapidly speeds up convergence by effectively giving the network a head start in gradient descent. Meta-learning also allowed the MLP to learn an underlying representation of certain scene types. For example, given a dataset of famous tourist landmarks, an initialized NeRF could partially reconstruct a scene given one image. === NeRF in the wild === Conventional NeRFs are vulnerable to slight variations in input images (objects, lighting) often resulting in ghosting and artifacts. As a result, NeRFs struggle to represent dynamic scenes, such as bustling city streets with changes in lighting and dynamic objects. In 2021, researchers at Google developed a new method for accounting for these variations, named NeRF in the Wild (NeRF-W). This method splits the neural network (MLP) into three separate models. The main MLP is retained to encode the static volumetric radiance. However, it operates in sequence with a separate MLP for appearance embedding (changes in lighting, camera properties) and an MLP for transient embedding (changes in scene objects). This allows the NeRF to be trained on diverse photo collections, such as those taken by mobile phones at different times of day. === Relighting === In 2021, researchers added more outputs to the MLP at the heart of NeRFs. The output now included: volume density, surface normal, material parameters, distance to the first surface intersection (in any direction), and visibility of the external environment in any direction. The inclusion of these new parameters lets the MLP learn material properties, rather than pure radiance values. This facilitates a more complex rendering pipeline, calculating direct and global illumination, specular highlights, and shadows. As a result, the NeRF can render the scene under any lighting conditions with no re-training. === Plenoctrees === Although NeRFs had reached high levels of fidelity, their costly compute time made them useless for many applications requiring real-time rendering, such as VR/AR and interactive content. Introduced in 2021, Plenoctrees (plenoptic octrees) enabled real-time rendering of pre-trained NeRFs through division of the volumetric radiance function into an octree. Rather than assigning a radiance direction into the camera, viewing direction is taken out of the network input and spherical radiance is predicted for each region. This makes rendering over 3000x faster than conventional NeRFs. === Sparse Neural Radiance Grid === Similar to Plenoctrees, this method enabled real-time rendering of pretrained NeRFs. To avoid querying the large MLP for each point, this method bakes NeRFs into Sparse Neural Radiance Grids (SNeRG). A SNeRG is a sparse voxel grid containing opacity and color, with learned feature vectors to encode view-dependent information. A lightweight, more efficient MLP is then used to produce view-dependent residuals to modify the color and opacity. To enable this compressive baking, small changes to the NeRF architecture were made, such as running the MLP once per pixel rather than for each point along the ray. These improvements make SNeRG extremely efficient, outperforming Plenoctrees. === Instant NeRFs === In 2022, researchers at Nvidia enabled real-time training of NeRFs through a technique known as Instant Neural Graphics Primitives. An innovative input encoding reduces computation, enabling real-time training of a NeRF, an improvement orders of magnitude above previous methods. The speedup stems from the use of spatial hash functions, which have O ( 1 ) {\displaystyle O(1)} access times, and parallelized architectures which run fast on modern GPUs. == Related techniques == === Plenoxels === Plen

  Read more →
• 

  VLLM

  vLLM is an open-source software framework for inference and serving of large language models and related multimodal models. Originally developed at the University of California, Berkeley's Sky Computing Lab, the project is centered on PagedAttention, a memory-management method for transformer key–value caches, and supports features such as continuous batching, distributed inference, quantization, and OpenAI-compatible APIs. According to a project maintainer, the "v" in vLLM originally referred to "virtual", inspired by virtual memory. == History == vLLM was introduced in 2023 by researchers affiliated with the Sky Computing Lab at UC Berkeley. Its core ideas were described in the 2023 paper Efficient Memory Management for Large Language Model Serving with PagedAttention, which presented the system as a high-throughput and memory-efficient serving engine for large language models. In 2025, the PyTorch Foundation announced that vLLM had become a Foundation-hosted project. PyTorch's project page states that the University of California, Berkeley contributed vLLM to the Linux Foundation in July 2024. In January 2026, TechCrunch reported that the creators of vLLM had launched the startup Inferact to commercialize the project, raising $150 million in seed funding. == Architecture == According to its 2023 paper, vLLM was designed to improve the efficiency of large language model serving by reducing memory waste in the key–value cache used during transformer inference. The paper introduced PagedAttention, an algorithm inspired by virtual memory and paging techniques in operating systems, and described vLLM as using block-level memory management and request scheduling to increase throughput while maintaining similar latency. The project documentation and repository describe support for continuous batching, chunked prefill, speculative decoding, prefix caching, quantization, and multiple forms of distributed inference and serving. PyTorch has described vLLM as a high-throughput, memory-efficient inference and serving engine that supports a range of hardware back ends, including NVIDIA and AMD GPUs, Google TPUs, AWS Trainium, and Intel processors.

  Read more →
• 

  Huawei Member Center

  Huawei Member Center is a benefits app which runs using Huawei Mobile Services. Originally launched in China, Huawei Member Center is now being developed primarily around devices such as P40 Pro and the Nova 7. == Membership Levels == The Huawei Member Center provides rewards in two primary ways, 1) device-specific & promotions and 2) via frequent use of Huawei products and apps, using points to redeem additional benefits. In China, Huawei members are already classified into three levels, the highest being “elite”. Membership level determines the level of perks received, from priority access to the service hotline, new device events & proprietary early-access opportunities. Huawei ran a number of member events in 2019 called "Huawei Member Day" to promote the Member Center including providing tips for the Mate 30 Pro and offering a 50Gb cloud storage upgrade to users. == HMC in China == Huawei Member Center Has seen significant adoption in China and the east, the rewards for use on the app have ranged from free book coupons, discounted travel and exclusive gifts of new devices, such as the Huawei Enjoy Z.

  Read more →
• 

  Computational photography

  Computational photography refers to digital image capture and processing techniques that use digital computation instead of optical processes. Computational photography can improve the capabilities of a camera, or introduce features that were not possible at all with film-based photography, or reduce the cost or size of camera elements. Examples of computational photography include in-camera computation of digital panoramas, high-dynamic-range images, and light field cameras. Light field cameras use novel optical elements to capture three-dimensional scene information, which can then be used to produce 3D images, enhanced depth-of-field, and selective de-focusing (or "post focus"). Enhanced depth-of-field reduces the need for mechanical focusing systems. All of these features use computational imaging techniques. The definition of computational photography has evolved to cover a number of subject areas in computer graphics, computer vision, and applied optics. These areas are given below, organized according to a taxonomy proposed by Shree K. Nayar. Within each area is a list of techniques, and for each technique, one or two representative papers or books are cited. Deliberately omitted from the taxonomy are image processing (see also digital image processing) techniques applied to traditionally captured images to produce better images. Examples of such techniques are image scaling, dynamic range compression (i.e. tone mapping), color management, image completion (a.k.a. inpainting or hole filling), image compression, digital watermarking, and artistic image effects. Also omitted are techniques that produce range data, volume data, 3D models, 4D light fields, 4D, 6D, or 8D BRDFs, or other high-dimensional image-based representations. Epsilon photography is a sub-field of computational photography. == Effect on photography == Photos taken using computational photography can allow amateurs to produce photographs rivalling the quality of professional photographers, but as of 2019 do not outperform the use of professional-level equipment. == Computational illumination == This is controlling photographic illumination in a structured fashion, then processing the captured images, to create new images. The applications include image-based relighting, image enhancement, image deblurring, geometry/material recovery and so forth. High-dynamic-range imaging uses differently exposed pictures of the same scene to extend dynamic range. Other examples include processing and merging differently illuminated images of the same subject matter ("lightspace"). == Computational optics == This is a capture of optically coded images, followed by computational decoding to produce new images. Coded aperture imaging was mainly applied in astronomy and X-ray imaging to boost the image quality. Instead of a single pin-hole, a pinhole pattern is applied in imaging, and deconvolution is performed to recover the image. In coded exposure imaging, the on/off state of the shutter is coded to modify the kernel of motion blur. In this way, motion deblurring becomes a well-conditioned problem. Similarly, in a lens based coded aperture, the aperture can be modified by inserting a broadband mask. Thus, out of focus deblurring becomes a well-conditioned problem. The coded aperture can also improve the quality in light field acquisition using Hadamard transform optics. Coded aperture patterns can also be designed using color filters, in order to apply different codes at different wavelengths. This allows for increase the amount of light that reaches the camera sensor, compared to binary masks. == Computational imaging == Computational imaging is a set of imaging techniques that combine data acquisition and data processing to create the image of an object through indirect means to yield enhanced resolution, additional information such as optical phase or 3D reconstruction. The information is often recorded without using a conventional optical microscope configuration or with limited datasets. Computational imaging allows going beyond physical limitations of optical systems, such as numerical aperture, or even obliterates the need for optical elements. For parts of the optical spectrum where imaging elements such as objectives are difficult to manufacture or image sensors cannot be miniaturized, computational imaging provides useful alternatives, in fields such as X-ray and THz radiations. === Common techniques === Among common computational imaging techniques are lensless imaging, computational speckle imaging , ptychography and Fourier ptychography. Computational imaging technique often draws on compressive sensing or phase retrieval techniques, where the angular spectrum of the object is reconstructed. Other techniques are related to the field of computational imaging, such as digital holography, computer vision and inverse problems such as tomography. == Computational processing == This is the processing of non-optically-coded images to produce new images. == Computational sensors == These are detectors that combine sensing and processing, typically in hardware, like the oversampled binary image sensor. == Early work in computer vision == Although computational photography is a currently popular buzzword in computer graphics, many of its techniques first appeared in the computer vision literature, either under other names or within papers aimed at 3D shape analysis. == Art history == Computational photography, as an art form, has been practiced by capturing differently exposed pictures of the same subject matter and combining them. This was the inspiration for the development of the wearable computer in the 1970s and early 1980s. Computational photography was inspired by the work of Charles Wyckoff, and thus computational photography datasets (e.g. differently exposed pictures of the same subject matter that are taken in order to make a single composite image) are sometimes referred to as Wyckoff Sets, in his honor. Early work in this area (joint estimation of image projection and exposure value) was undertaken by Mann and Candoccia. Charles Wyckoff devoted much of his life to creating special kinds of 3-layer photographic films that captured different exposures of the same subject matter. A picture of a nuclear explosion, taken on Wyckoff's film, appeared on the cover of Life Magazine and showed the dynamic range from the dark outer areas to the inner core.

  Read more →
• 

  Flok (company)

  Flok (formerly Loyalblocks) was an American tech startup based in New York City that provides marketing services such as chatbots/AI, customer loyalty programs, mobile apps and CRM services to local businesses. In January 2017, the company was acquired by Wix.com. Around March 2017, Flok ceased regular communication. At some point in 2019 Flok communicated to its customers that it would shut down in March 2020. == Background == Flok was founded in 2011 by Ido Gaver and Eran Kirshenboim and has offices in Tel Aviv, Israel. In May 2013, Flok secured a $9 million Series A Round from General Catalyst Partners with participation from Founder Collective and existing investor Gemini Israel Ventures. In total, Flok has raised over $18 million in venture capital in three rounds. In May 2014, Flok announced a self-service loyalty platform for SMBs to build their own programs with beacon integration. At that time, approximately 40,000 businesses were using the service. In 2016, Flok released a turnkey chatbot service for local businesses, and was featured in AdWeek for developing the first weed bot chatbot for a California cannabis business. == Services == Flok offered an eponymous customer-facing app, that consumers use to receive rewards and deals from partner businesses, and a Flok business app for merchants to manage the platform.

  Read more →
• 

  Agent verification

  Agent verification is activity to gain assurances that purposeful artificial constructs act in accordance with their specifications. While primitive forms of inorganic agents have been used in manufacturing for centuries, the study of artificial agents did not begin until the mid 20th century. Foundational work on such agents was closely bound with the emergence of artificial intelligence as an academic discipline. Early agents deployed for industrial control systems and in computing were often controlled by quite simple logic however, not involving artificial intelligence as such. When deployed as part of a multi-agent system, even such simple agents could require special agent orientated testing methods, as their collective behaviour was challenging to verify with traditional testing techniques. Difficulties in providing assurances that agents will not behave in dangerous ways became more prevalent after the introduction of LLM agents, especially after the rapid acceleration of their deployment in 2025. The verification of agent behaviour can be conducted by formal or informal methods. Informal verification requires less mathematical skill. But when agents are part of systems where errors have significant risks — such as danger to human life, environmental damage or major financial loss — formal verification is preferred. Both regulators and system designers themselves like formal verification as it provides a high degree of mathematical certainty. It is not however always possible to formally test all aspects of an agent based system's behaviour, especially where newer LLM based agents are concerned, due in part to their high degree of autonomy. Accordingly, agent verification for low impact deployments might be carried out only with informal methods, while for high impact deployments, it may be performed with a mix of formal and informal techniques. == Terminology == In academia, the term agent verification is often defined to mean activity concerned with gaining assurance that the agent behaves in accordance with its specification - whether by processes such as testing or simulation. 'Verification' is typically contrasted with 'validation', the latter meaning activity concerned with checking that the specification itself meets user or real world needs. Such definitions are not universally adhered to however - for example, in some workplaces and documents, the words 'verification' and 'validation' can be used synonymously. Efforts to gain confidence in Agents have intensified sharply since 2025 due to the rapid roll out of LLM agents; different terms are sometimes used in the commercial sector. Here the term 'agent verification' can be used in the same sense as it is in academia, but sometimes the same activity can be covered by more ambiguous and wider ranging terms such as 'Agent governance' , 'Agent observability' or 'AI agent policing'. == History == === Classical agents === The theoretical underpinnings for artificial (inorganic) agents emerged in the mid 20th century, with establishment of cybernetics and artificial intelligence. Oliver Selfridge's 1958 Pandemonium - A Paradigm for Learning paper was an important early theoretical contribution in establishing agent oriented architecture. Practical implementations of agents for real world applications began to become widespread in the 1990s, after the introduction of the belief–desire–intention software model (BDI), and agent-oriented programming. Pure digital agents were deployed in computer infrastructure for purposes such as monitoring, while agents connected to real-world sensors and actuators were increasingly used in industrial control systems. While the concept of artificial agents was interwoven with early artificial intelligence studies right from the start, early agents lacked general purpose reasoning capabilities, often only having simple if then logic. Even a device as simple as a thermostat, which has a sensor and a means of acting, can be considered a proto agent in this sense. Verifying the behaviours of a simple single agent system is not generally especially difficult, but it can be a different matter when several simple agents coexist in the same system. Craig Reynolds's work on boids showed that relatively complex, "intelligent" behaviour can emerge from a number of such simple agents working together in a Multi-agent system (MAS). By the 1990s, even the behaviour of a single agent system could sometimes be quite complex; in accordance with the Belief–desire–intention software model, agents could have believes that might evolve over time. Agents were increasingly introduced that were controlled by quite large decision tree models, which had new vulnerabilities to adversarial attack. It was becoming increasingly apparent that traditional software verification methods had limitations for testing such agents, or even for the more primitive type of agents when they were deployed as part of a MAS. It was the use of agents for industrial control systems, sometimes associated with robotics, that lent urgency to the practice of agent verification. Informal testing might be acceptable for digital agents used say to monitor whether each of an organisation's computers are properly licensed. But with an increasing potential for faulty agents to result in a failure that might cause a large fire to break out at a chemical manufacturing plant, a botched medical operation, or even a crashed aircraft, the need to develop reliable means of verifying behaviour of such agents was considered urgent. The Foundation for Intelligent Physical Agents was established in 1996. From the late 90s, a growing number of industry and university based scientists began working on the problem, with researchers publishing papers on the verification of both single and multi agent systems. Much of this work showed how formal verification techniques like model checking could be used to gain a high level of assurance that agent based systems would conform with their specification. A 2018 systematic review covering 231 studies found that model checking was the most common technique for agent verification, with theorem proving the second most commonly used formal verification method. In the first two decades of the 20th century, agents run by AI became more common, with Siri and Alexa being well known examples. But such agents still lacked general reasoning capabilities and did not pose new pressing problems for agent verification. === General purpose reasoning agents === The advent of LLMs created huge potential for further use of artificial agents, as agents based on them could have general purpose cognitive abilities. Agents run by LLMs (and occasionally non-LLM foundation models) have similar vulnerability to adversarial attack as those run by decision tree models. The wider scope of actions for LLM agents has created new challenges for their verification, over and above those present for classical agents. For example, the LLM's neural network endows it with infinite domains, an especial challenge for traditional formal verification techniques. Academics began to study the problems involved in verifying LLM agents from 2018. Deployment of such agents began to accelerate in late 2023 after OpenAI's "function-calling" API was made available, and especially after Anthropic's late 2024 introduction of Model Context Protocol (MCP), a standardised way for LLM agents to gain contextual awareness, and to act on the world by calling various external tools. The rapid rollout of LLM agents following MCP's release has seen the task of agent verification receive increased attention within academia, and also from the private sector. In 2024 and 2025 several startups focusing on LLM agent verification have been founded in both Europe and the US to meet growing demand. == Approaches == === Formal verification === Formal verification involves proving the correctness of some or all aspects of a system using mathematical methods. Such methods can range from manual formal proof, to verification assisted with automated theorem provers like Isabelle. For agent verification, model checking is by far the most frequently used formal verification method; for pre-LLM models it was often complemented with techniques using computation tree logic. Another common method is theorem proving. Formal verification provides a higher degree of confidence than informal methods, but it is not always used, even when it is possible. Sometimes a person or organisation developing software agents won't have the necessary skills, or may not see it as worth the effort if the agent(s) will not have the ability to cause much harm even if they malfunction. When agents are deployed in systems where errors could have serious consequences, the ability of formal verification methods to provide mathematical certainty tends to be strongly preferred by both regulators and designers themselves. But even for high impact systems, formal verificatio

  Read more →
• 

  Luminoso

  Luminoso is a Cambridge, MA-based text analytics and artificial intelligence company. It spun out of the MIT Media Lab and its crowd-sourced Open Mind Common Sense (OMCS) project. The company has raised $20.6 million in financing, and its clients include Sony, Autodesk, Scotts Miracle-Gro, and GlaxoSmithKline. == History == Luminoso was co-founded in 2010 by Dennis Clark, Jason Alonso, Robyn Speer, and Catherine Havasi, a research scientist at MIT in artificial intelligence and computational linguistics. The company builds on the knowledge base of MIT’s Open Mind Common Sense (OMCS) project, co-founded in 1999 by Havasi, who continues to serve as its director. The OCMS knowledge base has since been combined with knowledge from other crowdsourced resources to become ConceptNet. ConceptNet consists of approximately 28 million statements in 304 languages, with full support for 10 languages and moderate support for 77 languages. ConceptNet is a resource for making an AI that understands the meanings of the words people use. During the World Cup in June 2014, the company provided a widely reported real-time sentiment analysis of the U.S. vs. Germany match, analyzing 900,000 posts on Twitter, Facebook and Google+. == Applications == The company uses artificial intelligence, natural language processing, and machine learning to derive insights from unstructured data such as contact center interactions, chatbot and live chat transcripts, product reviews, open-ended survey responses, and email. Luminoso's software identifies and quantifies patterns and relationships in text-based data, including domain-specific or creative language. Rather than human-powered keyword searches of data, the software automates taxonomy creation around concepts, allowing related words and phrases to be dynamically generated and tracked. Commercial applications include analyzing, prioritizing, and routing contact center interactions; identifying consumer complaints before they begin to trend; and tracking sentiment during product launches. The software natively analyzes text in fourteen languages, as well as emoji. == Products == Luminoso's technology can be accessed via two products: Luminoso Daylight and Luminoso Compass. Luminoso Daylight enables a deep-dive analysis into batch or real-time data, whereas Luminoso Compass automates the categorization of real-time data. Both products offer a user interface as well as an API. Luminoso's products can be implemented through either a cloud-based or an on-premise solution. == Research == Luminoso continues to actively conduct research in natural language processing and word embeddings and regularly participates in evaluations such as SemEval. At SemEval 2017, Luminoso participated in Task 2, measuring the semantic similarity of word pairs within and across five languages. Its solution outperformed all competing systems in every language pair tested, with the exception of Persian. == Recognition == Luminoso has been listed as a "Cool Vendor in AI for Marketing" by Gartner, and has also been named a "Boston Artificial Intelligence Startup to Watch" by BostInno. In May 2017, Luminoso was recognized as having the Best Application for AI in the Enterprise by AI Business, and was also shortlisted as the Best AI Breakthrough and Best Innovation in NLP. == Competitors == Major competitors include Clarabridge and Lexalytics. == Investors == The company raised $1.5 million from angel investors led by Basis Technology in 2012. Its first institutional funding round of $6.5 was completed in July 2014, led by Acadia Woods with participation from Japan’s Digital Garage. The company followed that with a $10M series B funding round in December 2018, led by DVI Equity Partners, with participation from Liberty Global Ventures, DF Enterprises, Raptor Holdco, Acadia Woods Partners, and Accord Ventures, among others.

  Read more →
• 

  List of large language models

  A large language model (LLM) is a type of machine learning model designed for natural language processing tasks such as language generation. LLMs are language models with many parameters, and are trained with self-supervised learning on a vast amount of text. == List == For the training cost column, 1 petaFLOP-day equals 1 petaFLOP/sec × 1 day, or 8.64×1019 FLOP (floating point operations). Only the cost of the largest model is shown. The number of parameters is measured in billions, and the training cost is measured in petaFLOP-days. === 2018 === === 2019 === === 2020 === === 2021 === === 2022 === === 2023 === === 2024 === === 2025 === === 2026 ===

  Read more →
• 

  Cleverbot

  Cleverbot is a chatterbot web application. It was created by British AI scientist Rollo Carpenter and launched in October 2008. It was preceded by Jabberwacky, a chatbot project that began in 1988 and went online in 1997. In its first decade, Cleverbot held several thousand conversations with Carpenter and his associates. Since launching on the web, the number of conversations held has exceeded 150 million. Besides the web application, Cleverbot is also available as an iOS, Android, and Windows Phone app. == Operation == Cleverbot's responses are not pre-programmed because it learns from human input: Humans type into the box below the Cleverbot logo and the system finds all keywords or an exact phrase matching the input. After searching through its saved conversations, it responds to the input by finding how a human responded to that input when it was asked, in part or in full, by Cleverbot. Cleverbot participated in a formal Turing test at the 2011 Techniche festival at the Indian Institute of Technology Guwahati on 3 September 2011. Out of the 1334 votes cast, Cleverbot was judged to be 59.3% human, compared to the rating of 63.3% human achieved by human participants. A score of 50.05% or higher is often considered to be a passing grade. The software running for the event had to handle just 1 or 2 simultaneous requests, whereas online Cleverbot is usually talking to around 10,000 to 50,000 people at once. == Developments == Cleverbot is constantly growing in data size at the rate of 4 to 7 million interactions per day. Updates to the software have been mostly behind the scenes. In 2014, Cleverbot was upgraded to use GPU serving techniques. Unlike Eliza, the program does not respond in a fixed way, instead choosing its responses heuristically using fuzzy logic, the whole of the conversation being compared to the millions that have taken place before. Cleverbot now uses over 279 million interactions, about 3-4% of the data it has already accumulated. The developers of Cleverbot are attempting to build a new version using machine learning techniques. An app that uses the Cleverscript engine to play a game of 20 Questions has been launched under the name Clevernator. Unlike other such games, the player asks the questions and it is the role of the AI to understand, and answer factually. An app that allows owners to create and talk to their own small Cleverbot-like AI has been launched, called Cleverme! for Apple products. == In popular culture == Cleverbot received media attention after being featured in the popular 2010 creepypasta ARG web serial Ben Drowned by Alexander D. Hall. In early 2017, a Twitch stream of two Google Home devices modified to talk to each other using Cleverbot garnered over 700,000 visitors and over 30,000 peak concurrent viewers.

  Read more →
• 

  Microsoft Support Diagnostic Tool

  The Microsoft Support Diagnostic Tool (MSDT) is a legacy service in Microsoft Windows that allows Microsoft technical support agents to analyze diagnostic data remotely for troubleshooting purposes. In April 2022 it was observed to have a security vulnerability that allowed remote code execution which was being exploited to attack computers in Russia and Belarus, and later against the Tibetan government in exile. Microsoft advised a temporary workaround of disabling the MSDT by editing the Windows registry. == Use == When contacting support the user is told to run MSDT and given a unique "passkey" which they enter. They are also given an "incident number" to uniquely identify their case. The MSDT can also be run offline which will generate a .CAB file which can be uploaded from a computer with an internet connection. == Security vulnerabilities == === Follina === Follina is the name given to a remote code execution (RCE) vulnerability, a type of arbitrary code execution (ACE) exploit, in the Microsoft Support Diagnostic Tool (MSDT) which was first widely publicized on May 27, 2022, by a security research group called Nao Sec. This exploit allows a remote attacker to use a Microsoft Office document template to execute code via MSDT. This works by exploiting the ability of Microsoft Office document templates to download additional content from a remote server. If the size of the downloaded content is large enough it causes a buffer overflow allowing a payload of Powershell code to be executed without explicit notification to the user. On May 30 Microsoft issued CVE-2022-30190 with guidance that users should disable MSDT. Malicious actors have been observed exploiting the bug to attack computers in Russia and Belarus since April, and it is believed Chinese state actors had been exploiting it to attack the Tibetan government in exile based in India. Microsoft patched this vulnerability in its June 2022 patches. === DogWalk === The DogWalk vulnerability is a remote code execution (RCE) vulnerability in the Microsoft Support Diagnostic Tool (MSDT). It was first reported in January 2020, but Microsoft initially did not consider it to be a security issue. However, the vulnerability was later exploited in the wild, and Microsoft released a patch for it in August 2022. The vulnerability is caused by a path traversal vulnerability in the sdiageng.dll library. This vulnerability allows an attacker to trick a victim into opening a malicious diagcab file, which is a type of Windows cabinet file that is used to store support files. When the diagcab file is opened, it triggers the MSDT tool, which then executes the malicious code. Originally discovered by Mitja Kolsek, the DogWalk vulnerability is caused by a path traversal vulnerability in the sdiageng.dll library. This vulnerability allows an attacker to trick a victim into opening a malicious diagcab file, which is a type of Windows cabinet file that is used to store support files. When the diagcab file is opened, it triggers the MSDT tool, which then executes the malicious code. The vulnerability is exploited by creating a malicious diagcab file that contains a specially crafted path. This path contains a sequence of characters that is designed to exploit the path traversal vulnerability in the sdiageng.dll library. When the diagcab file is opened, the MSDT tool will attempt to follow the path. However, the path will contain characters that are not valid for a Windows path. This will cause the MSDT tool to crash. When the MSDT tool crashes, it will generate a memory dump. This memory dump will contain the malicious code that was executed by the MSDT tool. The attacker can then use this memory dump to extract the malicious code and execute it on their own computer. == Retirement == Microsoft will no longer be supporting the Windows legacy inbox Troubleshooters. In 2025, Microsoft will remove the MSDT platform entirely. Get Help is the replacement tool. == Windows versions == Windows 7 Windows 8.1 Windows 10 Windows 11 (up to 22H2) Future versions and feature upgrades will deprecate the MSDT after May 23, 2023.

  Read more →
• 

  Transduction (machine learning)

  In logic, statistical inference, and supervised learning, transduction or transductive inference is reasoning from observed, specific (training) cases to specific (test) cases. In contrast, induction is reasoning from observed training cases to general rules, which are then applied to the test cases. The distinction is most interesting in cases where the predictions of the transductive model are not achievable by any inductive model. Note that this is caused by transductive inference on different test sets producing mutually inconsistent predictions. Transduction was introduced in a computer science context by Vladimir Vapnik in the 1990s, motivated by his view that transduction is preferable to induction since, according to him, induction requires solving a more general problem (inferring a function) before solving a more specific problem (computing outputs for new cases): "When solving a problem of interest, do not solve a more general problem as an intermediate step. Try to get the answer that you really need but not a more general one.". An example of learning which is not inductive would be in the case of binary classification, where the inputs tend to cluster in two groups. A large set of test inputs may help in finding the clusters, thus providing useful information about the classification labels. The same predictions would not be obtainable from a model which induces a function based only on the training cases. Some people may call this an example of the closely related semi-supervised learning, since Vapnik's motivation is quite different. The most well-known example of a case-bases learning algorithm is the k-nearest neighbor algorithm, which is related to transductive learning algorithms. Another example of an algorithm in this category is the Transductive Support Vector Machine (TSVM). A third possible motivation of transduction arises through the need to approximate. If exact inference is computationally prohibitive, one may at least try to make sure that the approximations are good at the test inputs. In this case, the test inputs could come from an arbitrary distribution (not necessarily related to the distribution of the training inputs), which wouldn't be allowed in semi-supervised learning. An example of an algorithm falling in this category is the Bayesian Committee Machine (BCM). == Historical context == The mode of inference from particulars to particulars, which Vapnik came to call transduction, was already distinguished from the mode of inference from particulars to generalizations in part III of the Cambridge philosopher and logician W.E. Johnson's 1924 textbook, Logic. In Johnson's work, the former mode was called 'eduction' and the latter was called 'induction'. Bruno de Finetti developed a purely subjective form of Bayesianism in which claims about objective chances could be translated into empirically respectable claims about subjective credences with respect to observables through exchangeability properties. An early statement of this view can be found in his 1937 La Prévision: ses Lois Logiques, ses Sources Subjectives and a mature statement in his 1970 Theory of Probability. Within de Finetti's subjective Bayesian framework, all inductive inference is ultimately inference from particulars to particulars. == Example problem == The following example problem contrasts some of the unique properties of transduction against induction. A collection of points is given, such that some of the points are labeled (A, B, or C), but most of the points are unlabeled (?). The goal is to predict appropriate labels for all of the unlabeled points. The inductive approach to solving this problem is to use the labeled points to train a supervised learning algorithm, and then have it predict labels for all of the unlabeled points. With this problem, however, the supervised learning algorithm will only have five labeled points to use as a basis for building a predictive model. It will certainly struggle to build a model that captures the structure of this data. For example, if a nearest-neighbor algorithm is used, then the points near the middle will be labeled "A" or "C", even though it is apparent that they belong to the same cluster as the point labeled "B", compared to semi-supervised learning. Transduction has the advantage of being able to consider all of the points, not just the labeled points, while performing the labeling task. In this case, transductive algorithms would label the unlabeled points according to the clusters to which they naturally belong. The points in the middle, therefore, would most likely be labeled "B", because they are packed very close to that cluster. An advantage of transduction is that it may be able to make better predictions with fewer labeled points, because it uses the natural breaks found in the unlabeled points. One disadvantage of transduction is that it builds no predictive model. If a previously unknown point is added to the set, the entire transductive algorithm would need to be repeated with all of the points in order to predict a label. This can be computationally expensive if the data is made available incrementally in a stream. Further, this might cause the predictions of some of the old points to change (which may be good or bad, depending on the application). A supervised learning algorithm, on the other hand, can label new points instantly, with very little computational cost. == Transduction algorithms == Transduction algorithms can be broadly divided into two categories: those that seek to assign discrete labels to unlabeled points, and those that seek to regress continuous labels for unlabeled points. Algorithms that seek to predict discrete labels tend to be derived by adding partial supervision to a clustering algorithm. Two classes of algorithms can be used: flat clustering and hierarchical clustering. The latter can be further subdivided into two categories: those that cluster by partitioning, and those that cluster by agglomerating. Algorithms that seek to predict continuous labels tend to be derived by adding partial supervision to a manifold learning algorithm. === Partitioning transduction === Partitioning transduction can be thought of as top-down transduction. It is a semi-supervised extension of partition-based clustering. It is typically performed as follows: Consider the set of all points to be one large partition. While any partition P contains two points with conflicting labels: Partition P into smaller partitions. For each partition P: Assign the same label to all of the points in P. Of course, any reasonable partitioning technique could be used with this algorithm. Max flow min cut partitioning schemes are very popular for this purpose. === Agglomerative transduction === Agglomerative transduction can be thought of as bottom-up transduction. It is a semi-supervised extension of agglomerative clustering. It is typically performed as follows: Compute the pair-wise distances, D, between all the points. Sort D in ascending order. Consider each point to be a cluster of size 1. For each pair of points {a,b} in D: If (a is unlabeled) or (b is unlabeled) or (a and b have the same label) Merge the two clusters that contain a and b. Label all points in the merged cluster with the same label. === Continuous Label Transduction === These methods seek to regress continuous labels, often via manifold learning techniques. The idea is to learn a low-dimensional representation of the data and infer values smoothly across the manifold. == Applications and related concepts == Transduction is closely related to: Semi-supervised learning – uses both labeled and unlabeled data but typically induces a model. Case-based reasoning – such as the k-nearest neighbor (k-NN) algorithm, often considered a transductive method. Transductive Support Vector Machines (TSVM) – extend standard SVMs to incorporate unlabeled test data during training. Bayesian Committee Machine (BCM) – an approximation method that makes transductive predictions when exact inference is too costly.

  Read more →
• 

  CLEVER score

  The CLEVER (Cross Lipschitz Extreme Value for nEtwork Robustness) score is a way of measuring the robustness of an artificial neural network towards adversarial attacks. It was developed by a team at the MIT-IBM Watson AI Lab in IBM Research and first presented at the 2018 International Conference on Learning Representations. It was mentioned and reviewed by Ian Goodfellow as well. It was adopted into an educational game Fool The Bank by Narendra Nath Joshi, Abhishek Bhandwaldar and Casey Dugan

  Read more →